AnaGate CAN uno - CAN-Ethernet Gateway

Product description

The AnaGate CAN uno gateway connects a PC,  a embedded computer, a Simatic S7 or other device to a CAN bus via the TCP/IP network protocol (Ethernet). The AnaGate CAN uno basically works as a device with no own CAN identifier on the bus. The CAN identifier can be selected individually when sending telegrams.

The CAN messages are transparently embedded in TCP/IP telegrams to enable communication with any CAN device on the CAN network. This means that a CAN network can be addressed over the Internet or from multiple different PCs over a network. Higher protocol layers e.g. CANOpen®, Devicenet or J1939 can be used by the controller system too. WLAN communication is possible too via appropriate devices (access points).

The AnaGate CAN uno can be operated in three different modes:

  • In the gateway mode the CAN messages are transferred transparently over TCP/IP between the CAN network and the controller platform (e.g. PC) in both directions.
  • In the listen mode CAN messages can be recorded without influencing the CAN bus.
  • In the LAN bridge mode each interface can be sepearately interconnected to an arbitrary CAN network via an additional AnaGate CAN or AnaGate CAN uno/duo. CAN messages are exchanged transparently over TCP/IP between the two AnaGate devices. 

The AnaGate CAN uno is substantially more efficient than the established AnaGate CAN model because of its 32 bit processor. With full bus utilization at high bus speed (e.g. 1MBit) on the CAN field bus all CAN messages can be processed and sent on to the personal computer by a AnaGate CAN uno.

As Embedded PC with Linux platform the AnaGate CAN uno permits also the flexible extensions by downloading and running of application programs. The existing two USB interfaces and the digital inputs/outputs can be accessed too.

Find Us
Language
English Deutsch
CAN Links
CAN in Automation CANopen CANFestival