Changelog

Unterstützung für bis zu 5 zyklische CAN-Nachrichten pro CAN-Port hinzugefügt

Fix für negative Counter auf Webinterface-Statusseite bei Überlauf

Added support for up to 5 cyclic CAN messages per port

Fix for negative overflowing counters on web interface Status page

WLAN and WWAN support in AnaGate X series

SetConfig: also accept DataConfirmation parameter while HighSpeed mode is active

Added support for hardware CAN ID filter for X series

Web interface: Firmware upload form doesn't filter by MIME type any more to prevent browsers from hiding update files

Fix Activity LED not blinking on V2 platform

Lua interpreter updated to version 1.0.16 (Lua 5.1 -> 5.2)

Fix: Increment TCP transmit counter when sending via bridge.

Webinterface: Support user defined CAN baud rates locally and via bridge.

Read timestamp for received CAN telegrams as early as possible.

Fix for connections over UDP.

Webinterface: Extended bridge settings for custom TCP/UDP ports.

Fixed error at unloading the driver during active transmit timeout handling.

Support for bridge connection to hostname instead of IP address.

uploadlua.cgi: AnaGate CAN USB/DIN RAIL: Remove directory path from file name of Lua scripts that are uploaded with old versions of Microsoft Internet Explorer.

Web interface v1.3.8: Allow handling and deleting of Lua scripts with backslashes in the file name.

Switched from CommonLib to libAnaGate und libAnaGateExt.

Adjusted for changed defines in CAN driver.

Fix handling received CAN telegrams at odd-numbered memory addresses.

Telegrams received over CAN bus are forwarded via UDP according to entries in /firmware/cantoudp.ini (if available).

Fix for crash during firmware startup if driver is not loaded.

Error counters now no more global, but for each existing CAN port.

Counter for sent TCP messages now takes acount of open connections.

If error (timeout) occurs during DataReq() the connection is now closed.

Alive mechanism is deactivated per default on reused connections.

New command: GetTime

Default mode for CAN ports is called "offline" instead of "config".

Fix on firmware startup: operating mode was not assigned correctly.

Support of the digital ios on AnaGate CAN uno DIN rail.

New CAN device driver V1.3.7: invalid buffer size for messages with timestamp.

When receiving a message with timestamp, the timestamp in the message is removed if timestamps are not requested in connection.

Activity LED access implementation renewed.

New CAN device driver V1.3.5: new operation modus offline.

Firmware switches on startup from listen to normal mode after configured bad rate is set.

CAN firmware and inde.cgi (webserber( for AnaGate CAN uno, duo + qauuto now dynamically linked.

New CAN device driver V1.3.4.

CRC error fixed.

CANopen extensions activated.

New NO_NET-CONFIG for CPU1800.

New CAN device driver V1.3.3: support for AnaGate CAN USB.

New web server with Lua support.

New CAN device driver V1.3.2: outgoing telegrams are queued in driver.

Alive mode added

Firmware calls Lua script /lua/start.sh if exists.

Support for UPD added.

Interface between web server and firmware rewritten.

CANopen commands added.

Bugfix routing of standard gateway: route to SetupIP.shadded.

Bugfix bridge mode: bridge connection is not reconnected after system restart, when high speed mode has been activated.

Bugfix message exchange driver/firmware layer (crash on high bus traffic).

Log output in web interface changed: the full system time is printed out.

New command: OP_ANAGATE_RESTART_REQ.

Bugfix in OP_ANAGATE_GET_INFO_REQ (invalid serial nummer returned).

New CAN device driver V1.3.1: bugfix for lost messages when copying data from driver to firmware layer.

Z-Card IP: error flag added.

Z-Card IP-Intervall bug fixed.

Z-Card Alive timer increased from 3 to 10 IP cycles.

Support of timestamps of CAN telegrams.

New CAN device driver V1.3.0: support of timestamps.

Initial version

CAN device driver V1.2.0.