AnaGate CAN uno/uno DIN rail - Firmware Changelog

In the following you will find information about changes of actual and older firmware versions of the AnaGate CAN uno and AnaGate CAN uno (DIN rail modell).

AnaGate CAN uno Firmware

Revision History
Revision 1.3.18	24.02.2012	JGo
Fix handling received CAN telegrams at odd-numbered memory addresses.
Revision 1.3.17	13.12.2011	JGo
Telegrams received over CAN bus are forwarded via UDP according to entries in /firmware/cantoudp.ini (if available).
Revision 1.3.16	30.08.2011	JGo
Fix for crash during firmware startup if driver is not loaded. Error counters now no more global, but for each existing CAN port. Counter for sent TCP messages now takes acount of open connections. If error (timeout) occurs during DataReq() the connection is now closed. Alive mechanism is deactivated per default on reused connections. New command: GetTime Default mode for CAN ports is called "offline" instead of "config". Fix on firmware startup: operating mode was not assigned correctly.
Revision 1.3.15	25.07.2011	JGo
Support of the digital ios on AnaGate CAN uno DIN rail.
Revision 1.3.14	19.07.2011	JGo
New CAN device driver V1.3.7: invalid buffer size for messages with timestamp.
Revision 1.3.13	22.06.2011	SWe
When receiving a message with timestamp, the timestamp in the message is removed if timestamps are not requested in connection.
Revision 1.3.12	19.04.2011	JGo
Activity LED access implementation renewed. New CAN device driver V1.3.5: new operation modus offline.
Revision 1.3.11	04.02.2011	JGo
Firmware switches on startup from listen to normal mode after configured bad rate is set. CAN firmware and inde.cgi (webserber( for AnaGate CAN uno, duo + qauuto now dynamically linked. New CAN device driver V1.3.4.
Revision 1.3.10	27.01.2011	JGo
CRC error fixed. CANopen extensions activated. New NO_NET-CONFIG for CPU1800. New CAN device driver V1.3.3: support for AnaGate CAN USB.
Revision 1.3.9	05.08.2010	JGo
New web server with Lua support. New CAN device driver V1.3.2: outgoing telegrams are queued in driver.
Revision 1.3.8	04.08.2010	JGo
Alive mode added Firmware calls Lua script `/lua/start.sh` if exists.
Revision 1.3.7	21.05.2010	THa
Support for UPD added.
Revision 1.3.6	11.05.2010	SWe
Interface between web server and firmware rewritten. CANopen commands added.
Revision 1.3.5	22.07.2009	THa
Bugfix routing of standard gateway: route to `SetupIP.sh`added. Bugfix bridge mode: bridge connection is not reconnected after system restart, when high speed mode has been activated.
Revision 1.3.4	02.07.2009	THa
Bugfix message exchange driver/firmware layer (crash on high bus traffic). Log output in web interface changed: the full system time is printed out.
Revision 1.3.3	15.05.2009	THa
New command: OP_ANAGATE_RESTART_REQ. Bugfix in OP_ANAGATE_GET_INFO_REQ (invalid serial nummer returned). New CAN device driver V1.3.1: bugfix for lost messages when copying data from driver to firmware layer.
Revision 1.3.2	30.04.2009	THa
Z-Card IP: error flag added.
Revision 1.3.1	15.04.2009	THa
Z-Card IP-Intervall bug fixed. Z-Card Alive timer increased from 3 to 10 IP cycles.
Revision 1.3.0	30.03.2009	THa
Support of timestamps of CAN telegrams. New CAN device driver V1.3.0: support of timestamps.
Revision 1.2.0	14.02.2009	THa
Support of 4 CAN ports in common firmware code. New CAN device driver V1.2.0: support of 4 CAN ports.
Revision 1.1.13	20.01.2009	THa
Bugfix in GetGetFilter command: invalid confirmation.
Revision 1.1.12	12.12.2008	THa
Initial version CAN device driver V1.1.4.

AnaGate CAN uno (DIN rail) Firmware

Revision History
Revision 1.3.18	24.02.2012	JGo
Fix handling received CAN telegrams at odd-numbered memory addresses.
Revision 1.3.17	13.12.2011	JGo
Telegrams received over CAN bus are forwarded via UDP according to entries in /firmware/cantoudp.ini (if available).
Revision 1.3.16	30.08.2011	JGo
Fix for crash during firmware startup if driver is not loaded. Error counters now no more global, but for each existing CAN port. Counter for sent TCP messages now takes acount of open connections. If error (timeout) occurs during DataReq() the connection is now closed. Alive mechanism is deactivated per default on reused connections. New command: GetTime Default mode for CAN ports is called "offline" instead of "config". Fix on firmware startup: operating mode was not assigned correctly.
Revision 1.3.15	25.07.2011	JGo
Support of the digital ios on AnaGate CAN uno DIN rail.
Revision 1.3.14	19.07.2011	JGo
New CAN device driver V1.3.7: invalid buffer size for messages with timestamp.
Revision 1.3.13	22.06.2011	SWe
When receiving a message with timestamp, the timestamp in the message is removed if timestamps are not requested in connection.
Revision 1.3.12	19.04.2011	JGo
Activity LED access implementation renewed. New CAN device driver V1.3.5: new operation modus offline.
Revision 1.3.11	04.02.2011	JGo
Firmware switches on startup from listen to normal mode after configured bad rate is set. CAN firmware and inde.cgi (webserber( for AnaGate CAN uno, duo + qauuto now dynamically linked. New CAN device driver V1.3.4.
Revision 1.3.10	27.01.2011	JGo
CRC error fixed. CANopen extensions activated. New NO_NET-CONFIG for CPU1800. New CAN device driver V1.3.3: support for AnaGate CAN USB.