AnaGate Tools - Changelog

Fixed bug on receiving data when msg-window is not initialised

Fixed bug on first initialisation of filter settings

Added diplay of messages per second and count of messages

Catch errors in lua scripts and show them

Fixed bug in interpretation of CANopen messages

Added switch on/off of CANopen function on the AnaGate (only admin mode)

Information, filter would be ignored if high speed moede is on, added

filter settings will be saved in registry

updated CANopen send window (deaktivated of fields for send value)

deactivated check boxes for lua-scripts if no scripts were found

CAN modus "configuration" added

Bugfix: Error when sending remote frames

CRC errors are displayed red in message window with error message

new command: restart of Lua scripts

Lua scripting added to interpret, format and send CAN telegrams

Nagle algortihm deactivated for TCP

Filter settings are validated when active client settings are changed

individual path of log file)

indivual baud rate

path of log file is set to CurrentDirectory

Bug in FOX-Toolkit fixed (FXMessageChannel)

new icons, upgrade to FOX version 1.7.15

Highspeed mode and considerprio added

extensions for Anagate uno/duo

termination of Anagate port is configurable

number of maximum message in window can be configured

Support of CAN baudrates 10kBit and 125kBit

periodic sends of CAN telegrams implemented

Message window limited to 10000 entries

Dialog for reading/writing of digital io ports redesigned

Bugfix for sending telegram error

new icons

Initial version

Bugfix: Fixed an error on load a hexfile.

Bugfix: Fixed an error on sector erase.

Save/Restore of the current path at the file open dialog

File format (Intel/binary) selectable for batch (write) processing

Bugfix: SPI-EEProm.ini is only written if settings are changed.

File format (Intel/binary) selectable for batch processing

Upgrade to commonlib 1.0.15

Bugfix: Error verifing of FLASH page size for AT45 family

Hex file improvemnet (erase of value/range

New: Check of currently used baud rate

Bugfix: Error when programming device types of family ST

Bugfix: Crash when closing MDI window during file load

Bugfix: Error when programming device type AT25F

Upgrade to commonlib 1.0.13 and AnaGate API 1.9

Bugfix: internal data structure (CHexfile)

CommonLib with deacitavted TCP Nagle algorithm

Upgrade to commonlib 1.0.12 and AnaGate API 1.8

Display of hex data in 8-, 16- and 32 byte format

Edititing of single bytes in hex data file

Bugfix: setting of offset not always correct

New: device family "FAM_ST_M950XX" added

Reading of sub ranges of an EEPROM

Support of AT45DB642D

Memory limitation of hex data files increased to 32MB

Upgrade to commonlib 1.0.11

Hex data file with CRC errors can now be loaded

New parameters of EEPROM types (like function to erase, valid voltage values for EEPROM type.

Menu item to erase EEPROMs. If no special erase command supported, a selectable value can be written.

New parameter how to erase EEPROMs before writing the device (automatically, full or none).

Upgrade to commonlib 1.0.9 and FOX lib 1.7.15

New EEPROM types: families AT25, AT25F, AT45

Connect timeout increased to 5 seconds.

Delay added before reading status register first time (problem with M25P16)

Upgrade to AnaGate API 1.4

Memory limitation of hex data files increased to 4MB

new file format: raw binary

Support of new devices (introduction of device families)

Upgrade to commonlib 1.0.7 and FOX lib 1.6.26

Batch mode added

Language support for various FOX gui elements (like File Open Dialog)

Initial version

Bugfix: Fixed an error on load a hexfile.

Save/Restore of the current path at the file open dialog

File format (Intel/binary) selectable for batch (write) processing

Bugfix: I2C-EEProm.ini will only be written on changes.

File format (Intel/binary) selectable for batch (read) processing

Bugfix: ERR_READ_INCOMPLETE is also returned for ERR_I2C_NAK errors.

Upgrade to commonlib 1.0.15

new parameter for batch processing: -nowindow

Upgrade to commonlib 1.0.14 and AnaGate API 1.10

Internal class improvements (CHexfileWindowI2C)

CommonLib with deacitavted TCP Nagle algorithm

Hex data file with CRC errors can now be loaded

Memory limitation of hex data files increased to 32MB

New function to erase EEPROMs

Upgrade to FOX lib 1.7.15 and AnaGate API 1.5

Timeout of TCP confirmation increased from 500 to 5000mx (problem if link is lost)

Edititing of single bytes in hex data file

Support of 24xx1025 (Microchip)

Support of new hex file format (reading and writing of raw binary data)

new logo

Upgrade to Commonlib 1.0.9 and AnaGate API 1.4

Upgrade to FOX lib 1.6.26 and Commonlib 1.0.7

Resource file now with version number

Dialog for reading/writing of digital io ports redesigned

Bugfix: computing of time zone

reading/writing of digital io ports

Batch processing added

Setting of locale/language

Help file added

Initial version