SPI EEPROM Programmer
The SPI EEPROM Programmer is a professional utility designed for programming serial EEPROMs and flash memories easily and quickly using an AnaGate SPI gateway.
Main program functions:
- Writes and reads out serial EEPROMs and flash memories on the SPI bus via TCP/IP
- Automatically checks the programmed data (verification)
- SPI baud rate: 10 to 6250 kbps
- Batch mode support
- EEPROM/flash types: M25P05, M25P16, M25P10, M25P20, MP25P40, M25P80, M95128, M95256,
AT25F512A, AT25F2048, AT25F4096, AT25040A, AT25080A sowie AT45DB041D
- Supported hex data formats: Intel Hex ASCII, Motorola S-Record and raw
binary format.
- Operating systems: Windows 2000/XP/2003 (Linux version available upon request)
All that is required on the personal computer is a standard network card, no
operating system drivers has to be installed.
Programming speed
The following speeds were achieved at a baud rate of 6 Mhz when programming various EEPROM/flash types, followed by verification of the programmed data.
| EEPROM type |
Size |
Page size |
Programming |
Verification |
Total |
| AT25080A |
1 KByte |
32 Byte |
0,65 sec |
0,10 sec |
0,75 sec |
| AT25F512 |
64 KByte |
128
Byte |
10,00 sec |
1,00
sec |
11,00 sec |
| M25P05 |
64 KByte |
256 Byte |
6,90 sec |
1,30 sec |
8,20 sec |
| M25P20 |
256 KByte |
256 Byte |
25,00 sec |
5,30 sec |
30,30 sec |
| AT25F0496 |
512
KByte |
256
Byte |
55,50 sec |
10,50
sec |
66,00
sec |
A conventional PC (Intel Pentium IV, 2.8 GHz, 512 MB RAM running Windows 2000) was used for taking the readings.
|
 |
SPI Programmer |
 |
|
|
Documents |
 |
|
|
Downloads |
|
|
|
)